Details:
This non-ferrous scrap baler produces more than 150,000 lbs. of compact force at more than 80 PSI of platent pressure. The 65” stroke cylinder provides maximum compaction, extending to within a few inches of the floor. Manufactured for tin, aluminum, brass, bronze, and other non-ferrous metals, it also bales paper, paper cores, plastics, and other recyclables.
Available Options
- Slotted Front Door
- Wire Guides (allows for front bale tie-off)
- Feed Chute
- Counter Weighted Floppy Retainer Dogs
- Oil Heater
- Weather Proof Package
TECHNICAL SPECIFICATIONS
PERFORMANCE
| Bale Volume | 50 cu. ft |
|---|---|
| No. of Bale Tie Slots | 5 |
| Compact Force lbs – Normal / Maximum | 150,798 |
| Platen Pressure | 84 PSI |
| Average Cycle Time | 53 Seconds |
| Loading Height | 53.50″ |
| Ejector System | Semi-Automatic |
HYDRAULIC / ELECTRICAL
| Motor HP | 10 HP Submersible – Dual Pump with Regen |
|---|---|
| Voltage 3 Phase
Full Load Amps (A = Amps |
208V, 230V, 480V
32A, 28A, 14A |
| Pump GPM | 14/4 Dual Pump with Regen |
| Factory Set System Pressure PSI | 3000 |
| Cylinder Bore x Stroke | 8” x 65” |
| Hydraulic Tank Capacity Gallons | 60 |
* Due to continual product improvement BACE reserves the right to change specifications without notice.
DIMENSIONS
| Height (D) | Width (B) | Depth (C) |
|---|---|---|
| 169.5″ | 94″ | 47″ |
DOCUMENTS
PRODUCT SHEET
OPERATIONS MANUAL
Other Vertical Balers
