GS Shear/Logger/Baler
The Harris GS Shear/Logger/Baler is designed to deliver superior performance that will keep pace with a company’s sustained growth. The GS Series provides an overall lower operating cost per ton.
Materials Designed to Process
- Auto Scrap
- Steel Mill Scrap
- Pipe and Plate
- #1 Heavy Melt Scrap
- #2 Heavy Melt Scrap
- Selected sections of freight cars and ship scrap
Designed for these Facilities
PRODUCT DETAILS:
Product Features:
Tough and Long Lasting
Harris has a history of long life in our machines. The GS Series is no different. The robust GS is designed to give 20-30+ years of service, something cheaper models can’t offer.
Designed to perform:
GS Clamshell
The true clamshell box is used for superior trapping and sizing of bulky material. The cylinder mount geometry allows from greater mechanical advantage. The result is higher side compression forces on the material.
Heavy Duty Frame
The GS frame construction is considerably heavier than comparable machines. The heavier frame adds to longevity and reduces the possibility of problems associated with shearing thick materials.
Harris Shear Blade
The shear blade has a 12 degree cutting angle improving shearing efficiency. The shear blades are through bolted for easier replacement and the shear blade has external guide adjustments. It is much easier and faster to make adjustments reducing down time.
Power to Spare
Harris GS Series Shear/Logger/Baler offers the highest baling PSI for other balers of this type. The extra power provides higher bale density.
Easily Maintain, Easily Service
Besides the external gib & guide adjustment, the GS BLS was designed with replaceable liner plates. The plates can be replaced renewing the machine and increasing the overall lifespan.
Total Control, Start to Finish
From the Independent load table which allows a greater visual inspection of material entering the charging box, to Harris top of the line total control system with on-demand, real time diagnostics and machine operating reports, the GS has your operation covered from start to finish.
Superior Performance
The Harris GS series offers superiority by utilizing 100HP motors, horizontal mounted pumps, and an independent load table, which allows for more visual inspection of material by the operator when the load is dumped into the charging box. Harris incorporates a simple to use OIT (operators interface terminal) control panel with basic commands, operational information and diagnostics. Production reporting is also included.
Harris has always utilized “regenerative circuits” on large cylinder flows. Harris also has a TRUE clamshell box for superior trapping and sizing of bulky material. Harris is manufactured in the US using US components and tested at the factory prior to shipment. Service and parts supported by Harris’ well trained staff of service technicians and support personnel.
FEATURES:
• Through bolt, leaf type individual hinges are very durable and easy to service.
• GS 9 is prewired for easier installation.
• Grease lubrication system.
• Shear and clamp cylinders are easily accessible from the top of the shear frame.
SHEARING:
Miscellaneous scrap, select #1 and #2 scrap, shapes, plate, pipe.
BALING/LOGGING:
Miscellaneous scrap, white goods, auto fenders, etc., factory clips & skeletons.
Power to Spare
Harris GS Series Shear/Logger/Baler offers the highest baling PSI for other balers of this type. The extra power provides higher bale density.
Easily Maintain, Easily Service
Besides the external gib & guide adjustment, the GS BLS was designed with replaceable liner plates. The plates can be replaced renewing the machine and increasing the overall lifespan.
Total Control, Start to Finish
From the Independent load table which allows a greater visual inspection of material entering the charging box, to Harris top of the line total control system with on-demand, real time diagnostics and machine operating reports, the GS has your operation covered from start to finish.
- Slab foundation with in-beds. Harris provides steel mounting plinths.
- The true clamshell box is used for superior trapping and sizing of bulky material.
- Superior cylinder mount geometry allows for greater mechanical advantage resulting in higher side compression forces on material.
- Replaceable liner plates, shear frame and charge box. All lined surfaces are machined for a precision fit.
- Flame hardened cylinder rods are utilized with heavy wall thickness on cylinder tubes along with TFE piston seals.
- Shear blades are through bolted – if properly torqued; bolt tightness is not an issue.
- Heavy Duty frame construction with weight considerably heavier than competition.
- 12 degree cutting angle shear knife for improved shearing efficiency.
Local Supplier of Canada
We are a local certified supplier for Harris Equipment and Accent Wire Tie Systems, supplying regions of Canada with baling equipment and supplies including:
Ontario • Québec • New Brunswick • Nova Scotia • Newfoundland and Labrador • Prince Edward Island
To ask about ordering this product, call or email us.
We offer these options for your baling needs:
Balers, shears, and shredders for processing applications.
Harris Website >
Baling wire and wire tier technology for bales.
ACCENT Website >
Baling wire and wire tier technology for bales.
ACCENT Website >
We sell and use certified Harris Equipment OEM parts in our equipment applications.
