TG Ferrous Baler

TG Ferrous Baler | Ferrous Baler

The TG ferrous metal baler is a standout for heavy-duty, high-production, reliable baling systems. The TG baler utilizes a three compression baling system to produce numerous bale sizes to meet market requirements.

Does size and strength matter?

The Harris TG baler is a large capacity, three compression baler meant to handle the toughest ferrous metals. The charge box and baling chamber are reinforced to withstand the toughest baling applications in the scrap metal industry.

Efficient Use of Time

The TG baler is designed with an independent loading hopper that enables separate loading of material while the baler is cycling. Keeping wait time down is essential to an efficient and productive operation.

Materials Designed to Process
  • Stainless Sheet (Soft Alloys)
  • Factory Clips
  • Skeletons
  • Wire
  • Tubing
  • Various Metals (Copper, Aluminum Sheet)
Designed for these Facilities
Contact Us
Ferrous Balers
Back to Balers

PRODUCT DETAILS:

The TG line of ferrous balers is the industry standard for heavy-duty, high production, reliable baling systems.

TG Balers compress material into the charging box with a massive lid and utilizes a three compression baling system to produce a bale.

TG Ferrous Baler

Product Features:

  • Independent Loading Hopper – large capacity loading hopper allows independent loading of the next charge while baler is cycling.
  • Large Capacity Charging Box – charging box capacities of 625 to 950 cu. ft. (17.6 m3 to 26.9 m3) allows a single charge of high volume light material as well as large bulky items.
  • Heavy Duty Structure – withstands the toughest baling applications in the industry. This results in less downtime and an extremely long operating life. Baler models weigh between 146 to 438 tons (132.4 to 397.3 tonne).
  • Solid State Controls provide greater reliability and simplifies operation.
  • Programmable Controller with Modem allows more precise operation of the baler with diagnostic support from the Harris Service Facility.
  • OIT (operator interface terminal) located on Operator’s Control Station allows the Operator to run diagnostics on the baler from the operator’s station and provides the Operator with the ability to program certain parts of the operating sequence.
  • High/Low Pressure Hydraulic System – uses high pressure for efficient application of force and low pressure for greater speed.
  • Hydraulic Vane Pumps – less expensive to maintain and replace than Piston Pumps.
  • Harris Manufactured Hydraulic Cylinders – flame hardened and polished rods with TFE pistons are recognized as the best in the industry. They provide long life with a minimum of maintenance.
  • Flame hardened cylinder rods with no chrome to scratch or chip.

MACHINE SPECIFICATIONS

MODEL TG-1218-B TG-1723-B TG-2229-B TG-4024-B TG-4036-B-4 TG-6034-B
HOPPER LOADING AREA 92″ x 216″ 100″ x 216″ 100″ x 230″ 120″ x 217″ 120″ x 217″ 121″ x 217″
CHARGE BOX 60″ x 216″ 60″ x 216″ 80″ x 240″ 80″ x 228″ 80″ x 228″ 80″ x 228″
PRESS BOX 60″ x 70″ x 256″ 60″ x 70″ x 256″ 80″ x 60″ x 280″ 80″ x 60″ x 280″ 80″ x 60″ x 284″ 80″ x 72″ x 288″
PRESS BOX CAPACITY Cubic Feet 622 622 777 780 780 960
BALE SIZE 24″ x 24″ x variable 24″ x 24″ x variable 24″ x 24″ x variable 24″ x 24″ x variable 28″ x 24″ x variable 36″ x 24″ x variable
BALE WEIGHT Average Weight 980 lbs. up to 1200 lbs.(cube)
up to 2200 lbs.(long)
1370 lbs. 1400 lbs. 1600 lbs. 2200 lbs.
CYCLE TIME seconds 73 69 74 81 78 95
MOTOR Two(2) 100 HP Two(2) 100 HP Three(3) 100 HP Four(4) 100 HP Four(4) 100 HP Four(4) 100 HP
MAIN PUMPS Four(4) 52 GPM @ 3500 PSI
Four(4) 33 GPM @ 2100 PSI
Four(4) 52 GPM @ 3500 PSI
Four(4) 67 GPM @ 1500 PSI
Six(6) 52 GPM @ 3200 PSI
Six(6) 67 GPM @ 1600 PSI
Eight(8) 52 GPM @ 3500 PSI
Eight(8) 67 GPM @ 1600 PSI
Eight(8) 52 GPM @ 3500 PSI
Eight(8) 67 GPM @ 1600 PSI
Eight(8) 52 GPM @ 3500 PSI
Eight(8) 67 GPM @ 1600 PSI

* Specifications may be subject to change. Check with your Carr representative for the most up-to-date information.

TG Ferrous Baler Brochure
Canadian Badge

Local Supplier of Canada

We are a local certified supplier for Harris Equipment and Accent Wire Tie Systems, supplying regions of Canada with baling equipment and supplies including:

Ontario • Québec • New Brunswick • Nova Scotia • Newfoundland and Labrador • Prince Edward Island

To ask about ordering this product, call or email us.

We offer these options for your baling needs:

Harris Equipment Logo

Balers, shears, and shredders for processing applications.
Harris Website >

Accent Wire Tie Logo

Baling wire and wire tier technology for bales.
ACCENT Website >

Accent Wire Tie Logo

Baling wire and wire tier technology for bales.
ACCENT Website >

Carr Industrial Logo

Contact us today to discuss how we can outfit your facility with balers, shredders, or shears from the Harris Equipment supplier of eastern Canada.
Supplying Ontario, Québec, and the Maritimes.

Sales • Parts • Service

Contact Us

We sell and use certified Harris Equipment OEM parts in our equipment applications.

Harris Equipment Supplier