Conquest Baler

Conquest 180™ | Horizontal Baler

Unmatched Productivity. Conquest™ High Performance Balers dramatically increase production while virtually eliminating bridging problems. The innovative design makes preconditioning prehistoric. No fluffer is required to bale high grades. Get up to speed with the most efficient machine on the market.

Achieve the Highest Thru-Put.

NO other baler can match the productivity of the Conquest™ patented Dual Articulating Compacting Sidewalls and we’re ready to prove it!

EXPECT MAXIMUM EXPORT WEIGHT.

Consistent bale integrity assures maximum export weight. Export up to 54-58,000 lbs. OCC on Export Containers. The Conquest delivers.

Materials Designed to Process
  • High Grade Paper
  • Cardboard (OCC)
  • Newspaper (ONP)
Features
Conquest 180 baler logo
Get a Quote
Horizontal Balers
Back to Balers

How It Works

With the lid closed, material is charged into the baler’s 72″ wide by 72″ long hopper.

When sufficient material is received, an infrared sensor actuales the compression cycle. The Dual Sides open allowing material to fall into the 72″ wide charge box.

The Dual Sides close. In the process, the vertical of the Dual Sides compresses the material while the lid portion traps and compresses the material. When the Dual Sides are closed, the main compression Ram compresses the material into the baling chamber. Any excess material above the compression Ram is cut and left for the next stroke.

THE CONQUEST

• Virtually eliminates bridging
• Achieves maximum thru-put
• Bales high-grades without fluffing
• Eliminates need to pre-condition material
• Maximizes export capacity

STANDARD FEATURES:

• Large Charge Box Opening
• Export Bale Size and Density
• Programmable Controller with Phone Modem
• Oil Cooler and Oil Heater
• 6 ft. Bale Runout Table
• Wye-Delta Starting

AVAILABLE OPTIONS:

• Conveyor Controls
• Feed Hopper Extensions
• Material Fluffers
• Baling Wire
• Smart Report
• Contact Factory for Other Options

Conquest180 Drawings

MACHINE SPECIFICATIONS

MODEL CONQUEST 180 200
TOTAL FORCE 361,700 LB (164 METRIC TONS)
SIDE CYLINDERS ONE CYLINDER FOR EACH SIDE
TENSION CYLINDER SINGLE CYLINDER TENSION DESIGN
RAM FACE PRESSURE 200 PSI (14 KG/CM)
OIL RESERVOIR 1400 GAL CAPACITY (5200 LITER)
FILTRATION 5 MICRON REPLACEMENT ELEMENT FILTER
AUTO-TIER (5) FIVE WIRE HYDRAULIC TIERMAX 10 GA BLACK ANNEALED WIRE
MAIN MOTOR (2) 100 HP, 460 V, 3 PHASE, TEFC, WYE-DELTA STARTING
COOLER FAN 7.5 HP, 460 V
COOLER PUMP 5 HP, 460 V
CONTROLS PROGRAMMABLE CONTROLLER WITH ETHERNET
PHOTOCELL INFRARED TYPE
HOPPER OPENING 72 in W x 72 in L (1.8 m x 1.8 m)
CHARGE BOX OPENING 72 in W x 72 in L (1.8 m x 1.8 m)
LENGTH OVERALL 36 ft (11 m) – frame only
WIDTH OVERALL 17 ft (5.2 m) – at the Tier Station
HEIGHT OVERALL 123 in (3.1 m) – H Charge Hopper
SHEAR BLADE High Abrasion-Resistant Alloy Steel
SHIPPING WEIGHT 60 t (approx.)
BALE SIZE EXPANDED 43 in W x 43 in H x variable L
1 m W x 1 m H x variable L
BALE VOLUME at 66 in L
at 1.7 m L
70 cubic ft expanded (approx.)
2 cubic m expanded (approx.)
CYCLE TIME 15 seconds (no load)
CAPACITY 36,000 cubic ft per hour
1,019 cubic m per hour
CONQUEST 180-200 MATERIAL Material Infeed Density
LB per Cubic ft (KG)
Bale Weight
LB (KG)
Density LB per
Cubic ft (KG)
Pounds
per Stroke
Tons
per Hour
HI GRADE 8-10 LB (3.6-4.5 KG) 2600-3200 LB (1179-1452 KG) 35-40 LB (16-18 KG) 1200-1500 65-90
NEWS 6-8 LB (2.7-3.6 KG) 2500-3000 LB (1134-1361 KG) 33-38 LB (15-17 KG) 900-1200 60-80
OCC 2-4 LB (.9-1.8 KG) 2200-2600 LB (998-1179 KG) 31-36 LB (14-16 KG) 300-600 28-45

* Specifications may be subject to change. Check with your Carr representative for the most up-to-date information.

Conquest AutoTie
Canadian Badge

Local Supplier of Canada

We are a local certified supplier for Harris Equipment and Accent Wire Tie Systems, supplying regions of Canada with baling equipment and supplies including:

Ontario • Québec • New Brunswick • Nova Scotia • Newfoundland and Labrador • Prince Edward Island

To ask about ordering this product, call or email us.

We offer these options for your baling needs:

Harris Equipment Logo

Balers, shears, and shredders for processing applications.
Harris Website >

Accent Wire Tie Logo

Baling wire and wire tier technology for bales.
ACCENT Website >

Accent Wire Tie Logo

Baling wire and wire tier technology for bales.
ACCENT Website >

Carr Industrial Logo

Contact us today to discuss how we can outfit your facility with balers, shredders, or shears from the Harris Equipment supplier of eastern Canada.
Supplying Ontario, Québec, and the Maritimes.

Sales • Parts • Service

Contact Us

We sell and use certified Harris Equipment OEM parts in our equipment applications.

Harris Equipment Supplier